Home > News > Content

CANGAS Advanced VSA Vaccum Pressure Swing Oxygen Generator Technology

As an extension of CANGAS PSA technology, CANGAS Vacuum swing adsorption (VSA) is a non-cryogenic gas separation technology. Since PSA oxygen is a mature technology, the VSA oxygen was developed to be more economic friendly - almost half power consumption of PSA oxygen technology!

Oxygen filling machine generator 6.jpg

Adsorption media is also the core part of VSA oxygen technology. Using special solids, or adsorbents, VSA segregates certain gases from a gaseous mixture under minimal pressure according to the species' molecular characteristics and affinity for the adsorbents. These adsorbents (e.g., zeolites) form a molecular sieve and preferentially adsorb the target gas species at near ambient pressure. The process then swings to a vacuum to regenerate the adsorbent material.


VSA is the best solution for onsite oxygen production so far. VSA differs from cryogenic distillation techniques of gas separation as well as pressure swing adsorption (PSA) techniques because it operates at near-ambient temperatures and pressures. VSA may actually be best described as a subset of the larger category of PSA. It differs primarily from PSA in that PSA typically vents to atmospheric pressures, and uses a pressurized gas feed into the separation process. VSA typically draws the gas through the separation process with a vacuum. For oxygen and nitrogen VSA systems, the vacuum is typically generated by a blower. However VSA is normally used for producing low capacity oxygen below 200m³/h. Hybrid VPSA systems with high capacity up to 10,000m³/h also exist. VPSA systems apply pressurized gas to the separation process and also apply a vacuum to the purge gas. VPSA systems, like one of the portable oxygen concentrators, are among the most efficient systems, measured on customary industry indices, such as recovery (product gas out/product gas in), productivity (product gas out/mass of sieve material). Generally, higher recovery leads to a smaller compressor, blower, or other compressed gas or vacuum source and lower power consumption. Higher productivity leads to smaller sieve beds. The consumer will most likely consider indices which have a more directly measurable difference in the overall system, like the amount of product gas divided by the system weight and size, the system initial and maintenance costs, the system power consumption or other operational costs, and reliability.


Produce your own oxygen! CANGAS is ready at your service.